If finances is a priority, there are lots of Formica choices in the marketplace that look nice. Due to this fact consideration needs to be made to pinning it on the sides and loads of wood glue applied alongside its length and left clamped to set; to carry it in place until it’s tiled, when the tile adhesive and grout will add further power and rigidity required.
However, as one aspect of the bathroom cabinet could be in opposition to a wall and the other aspect next to the bathe unit, it did not matter whether or not I drilled right through or not as sides of the bathroom cabinet usually are not going to be seen.
The one draw back is that as these Acrylic mirrors are so flexible unless they’re fitted completely flat to a flat surface they will distort the picture; for sensible use in a toilet, bathe room, and even on a dressing desk or wall in the bedroom a minor point which I can live with.
The thickness of the tiles I used to be utilizing (to match the tiles I used in renovating our shower room) was 10mm, slightly below half an inch, and taking into consideration a couple of millimetres for the tile adhesive 1/four inch plywood was the optimum selection, albeit (for added energy) it will want be underpinned with a back butt fitted to the again wall.
What I found about Acrylic mirrors in my research is that they are mild weight, generally effectively-priced and in contrast to standard mirrors are flexible so there is no such thing as a rick of them cracking if for example the wood door they are mounted to happens to warp; as wood does.…